Wing Struts:
Printing and assembly of the Fokker DR1 Wing Struts. Printing: All of the struts need to be printed using 100 percent infill. Standard...
top of page
Welcome! See our ever growing building blog below. Also make sure to visit our builders forum where you can get answers from our community!
Search
Robareeno
- Nov 15, 2021
- 1 min
Printing the Cowling
Instructions for Printing and installing the Cowling. Print settings: This part is not a single wall print. Material: LW PLA We have best...
83 views0 comments
Robareeno
- Nov 11, 2021
- 1 min
The Fokker DR1 Dummy Motor
Printing and assembly of the dummy motor. She's gorgeous but not exactly to scale. She's scale enough to look convincing under the...
110 views0 comments
Robareeno
- Nov 9, 2021
- 3 min
The Fokker DR1 Fuselage
Printing and assembly of the fuselage components. Printing the formers: The Formers: The Stringers: Fuselage Assembly Starting Point: As...
226 views0 comments
Robareeno
- Nov 9, 2021
- 2 min
Upper Wing Printing and Assembly
Use this guide for printing and assembly of the upper wing of the Fokker DR1. Inboard Aileron Outboard Aileron Aileron Assembly: The...
104 views0 comments
Robareeno
- Nov 8, 2021
- 3 min
Landing Gear and Wing
How to print and assemble the Fokker DR1 landing gear and wheels. Update 01-31-21: There is a "beta test" version of the main gear wing...
88 views0 comments
Robareeno
- Nov 8, 2021
- 2 min
Mid Wing Construction
The printed parts and assembly of the mid wing. Outboard Left Wing Panel: The below image shows how the print should look. Ensure that...
61 views0 comments
Robareeno
- Nov 8, 2021
- 7 min
Covering the Fokker DR1
This is the part of construction that scares new builders off. I promise you it is not hard. Let me help take away the mystery. Prior...
260 views0 comments
Robareeno
- Nov 8, 2021
- 4 min
Fokker DR1 Printer settings.
Why It's Important: The design of this airplane yields an airframe that is inherently light already. The way the components are oriented...
276 views0 comments
Robareeno
- Oct 20, 2021
- 1 min
Fokker DR1 Horizontal Stabilizer and Rudder
. Print guide for the tailfeathers Check out our Print settings guide first here: If you are fortunate to have a larger format printer,...
89 views0 comments
Robareeno
- Oct 20, 2021
- 1 min
Fokker DR1 Parts List
Motor: 2200KV brushless ESC: 60A Brushless for 2-4S battery. Amazon Propeller: 9x4.5 wood (please) for electric: Amazon Flight batteries...
212 views0 comments
Robareeno
- Oct 20, 2021
- 3 min
The Fokker DR1 3D Printed Plane Instruction Blog
This is the ever expanding construction manual for our new Fokker DR1 airplane. Table of Contents: Required Parts List: Fokker DR1...
1,067 views0 comments
bottom of page