The Fokker DR1 3D Printed Plane Instruction Blog
This is the ever expanding construction manual for our new Fokker DR1 airplane. Table of Contents: Required Parts List: Fokker DR1...
top of page
Welcome! See our ever growing building blog below. Also make sure to visit our builders forum where you can get answers from our community!
Main Instruction Pages:
Robareeno
- 1 min
The Spray Jetboat Building Blog How to assemble a 3D printed boat.
Find out how to print and build this awesome 3D printed Jetboat. Table of Contents: The Spray Jetboat hardware list: Build Plate Size for...
Robareeno
- 1 min
The Jetwing flying wing construction Manual.
This is the main construction manual for the Jetwing EDF flying wing Jet
Robareeno
- 2 min
The Pitts Special 48" Edition Table of Contents
This is the construction blog for the bigger version of the Pitts. Required Parts List: Pitts Printer Settings: Model Plans: Printing The...
Robareeno
- 2 min
MINI Extra 300 Main Construction Blog.
What is this thing? How do I build it? Introduction: The free mini Extra 300 has been a big hit, and we now have hundreds of downloads...
Robareeno
- 1 min
"The Big Brother" Extra 300 Profile Plane Instructions
Well, we now have two versions of this plane, and they are quite different. Here you will find the printing instructions for the bigger...
See All other posts below
Search
Robareeno
- Jul 19, 2022
- 1 min
The Pitts Printer Settings
Printer and slicer settings for the Redbaron RC Pitts Biplane. To have success printing this model I have custom Cura settings that will...
351 views
Robareeno
- Jul 19, 2022
- 1 min
The Pitts Wings:
Right Upper Wing: Print Setting: LightweightPLA thinwall. Click link for description. print orientation: see below pic. Right Upper...
51 views
Robareeno
- Nov 30, 2021
- 1 min
The Pitts Fuselage:
The Elevator: Print Setting: LightweightPLA thinwall. Click link for description. The Elevator Hinge: The Rudder: Print Setting:...
84 views
Robareeno
- Sep 2, 2021
- 1 min
Pitts Special Biplane Build Instructions.
This is the ever expanding building blog for the Redbaron RC Pitts. Table of Contents: Print Settings: Printing the Fuselage Printing the...
171 views
bottom of page