The Fokker DR1 3D Printed Plane Instruction Blog
This is the ever expanding construction manual for our new Fokker DR1 airplane. Table of Contents: Required Parts List: Fokker DR1...
top of page
Welcome! See our ever growing building blog below. Also make sure to visit our builders forum where you can get answers from our community!
Main Instruction Pages:
Robareeno
- 1 min
The Spray Jetboat Building Blog How to assemble a 3D printed boat.
Find out how to print and build this awesome 3D printed Jetboat. Table of Contents: The Spray Jetboat hardware list: Build Plate Size for...
Robareeno
- 1 min
The Jetwing flying wing construction Manual.
This is the main construction manual for the Jetwing EDF flying wing Jet
Robareeno
- 2 min
The Pitts Special 48" Edition Table of Contents
This is the construction blog for the bigger version of the Pitts. Required Parts List: Pitts Printer Settings: Model Plans: Printing The...
Robareeno
- 2 min
MINI Extra 300 Main Construction Blog.
What is this thing? How do I build it? Introduction: The free mini Extra 300 has been a big hit, and we now have hundreds of downloads...
Robareeno
- 1 min
"The Big Brother" Extra 300 Profile Plane Instructions
Well, we now have two versions of this plane, and they are quite different. Here you will find the printing instructions for the bigger...
See All other posts below
Search
Robareeno
- Jul 27, 2022
- 6 min
Paint and Graphics for the Mini Extra 300.
This section is intentionally last on the list because many of you may wish to ignore this section altogether. This is my list of...
240 views
Robareeno
- Jul 18, 2022
- 2 min
Weight Balance and First Flight for the Mini Extra 300.
This model is incredibly sensitive to proper weight and balance. Fortunately it is easy enough to check. Simply lift the plane with...
198 views
Robareeno
- Jul 18, 2022
- 4 min
Electronics for the Mini Extra 300.
Servo, Receiver, ESC, and Battery Installation. Hinges: All of the hinges for this model are created from a piece of clear packaging tape...
305 views
Robareeno
- Jul 18, 2022
- 5 min
Printing and Assembling the Fuselage Parts for the Mini Extra 300
This blog is for the construction of the fuselage for the mini Extra 300. Note, this blog page is for the paid version of this plane...
376 views
Robareeno
- Jul 12, 2022
- 2 min
Main Wing for the Mini Extra 300
How to print and build the main wing of the Extra 300. Note, this blog page is for the paid version of this plane with the full...
317 views
Robareeno
- Jul 11, 2022
- 2 min
MINI Extra 300 Main Construction Blog.
What is this thing? How do I build it? Introduction: The free mini Extra 300 has been a big hit, and we now have hundreds of downloads...
1,303 views
Robareeno
- Jul 11, 2022
- 2 min
MINI Extra 300 Model Description, Specifications, and Parts List
Specifications: Length: 392 millimeters Width: 462 millimeters Weight: under 250 grams ready to fly with battery. No FAA registration...
683 views
bottom of page