top of page
Welcome! See our ever growing building blog below.
Main Instruction Pages:


The Fokker DR1 3D Printed Plane Instruction Blog
This is the ever expanding construction manual for our new Fokker DR1 airplane. Table of Contents: Required Parts List: Fokker DR1...

Robareeno
3 min read


The Spray Jetboat Building Blog How to assemble a 3D printed boat.
Find out how to print and build this awesome 3D printed Jetboat. The Spray 3D Printed Jetboat profile view Table of Contents: The Spray...

Robareeno
1 min read


The Jetwing flying wing construction Manual.
This is the main construction manual for the Jetwing EDF flying wing Jet

Robareeno
1 min read


The Pitts Special 48" Edition Table of Contents
This is the construction blog for the bigger version of the Pitts. Required Parts List: Pitts Printer Settings: Model Plans: Printing...

Robareeno
2 min read


MINI Extra 300 Main Construction Blog.
What is this thing? How do I build it? Introduction: The free mini Extra 300 has been a big hit, and we now have hundreds of downloads...

Robareeno
2 min read


"The Big Brother" Extra 300 Profile Plane Instructions
Well, we now have two versions of this plane, and they are quite different. Here you will find the printing instructions for the bigger...

Robareeno
1 min read


Free Mini Extra 300 Profile Version Construction Blog
Here you will find everything related to the construction of the Extra 300 Profile plane: Table of Contents: Model description,...

Robareeno
1 min read


Pitts Special Biplane Build Instructions.
This is the ever expanding building blog for the Redbaron RC Pitts. Table of Contents: Print Settings: Printing the Fuselage Printing...

Robareeno
1 min read
See All other posts below
Search


Lower Wing for the 48" Pitts Biplane
This is the assembly of the right-hand lower wing. For the left-hand wing simply reverse everything. Wing Ribs: There are four different...

Robareeno
Feb 18, 20231 min read


Pitts 48" Edition Fuselage Printing and Assembly
Here's how to print and build the body. Make sure to reference the full resolution PDF plans provided in your purchase. It is not...

Robareeno
Feb 4, 20233 min read


The Pitts 48" Version Parts List:
The following items are all parts that I used to create the prototype version of this model. Note that I've transparently listed the...

Robareeno
Feb 2, 20233 min read




The Pitts Special 48" Edition Table of Contents
This is the construction blog for the bigger version of the Pitts. Required Parts List: Pitts Printer Settings: Model Plans: Printing...

Robareeno
Jan 25, 20232 min read


The Big Pitts Design Process.
I was finishing up on the smaller lightweight PLA printed Pitts project and decided I wanted to try an experiment with something much...

Robareeno
Dec 25, 20223 min read
bottom of page