The Fokker DR1 3D Printed Plane Instruction Blog
This is the ever expanding construction manual for our new Fokker DR1 airplane. Table of Contents: Required Parts List: Fokker DR1...
top of page
Welcome! See our ever growing building blog below.
Main Instruction Pages:
Robareeno
1 min read
The Spray Jetboat Building Blog How to assemble a 3D printed boat.
Find out how to print and build this awesome 3D printed Jetboat. Table of Contents: The Spray Jetboat hardware list: Build Plate Size for...
Robareeno
1 min read
The Jetwing flying wing construction Manual.
This is the main construction manual for the Jetwing EDF flying wing Jet
Robareeno
2 min read
The Pitts Special 48" Edition Table of Contents
This is the construction blog for the bigger version of the Pitts. Required Parts List: Pitts Printer Settings: Model Plans: Printing The...
Robareeno
2 min read
MINI Extra 300 Main Construction Blog.
What is this thing? How do I build it? Introduction: The free mini Extra 300 has been a big hit, and we now have hundreds of downloads...
Robareeno
1 min read
"The Big Brother" Extra 300 Profile Plane Instructions
Well, we now have two versions of this plane, and they are quite different. Here you will find the printing instructions for the bigger...
See All other posts below
Search
Robareeno
Aug 13, 20201 min read
3-D print instructions for the Spray Jet boat rear turbine body.
This is a video on how to set up the rear Jet boat main turbine body up to successfully print this working part.
426
Robareeno
Aug 13, 20203 min read
Cura Slicer settings for the Spray Jetboat
Our recommendations for Cura Slicer settings for the Spray Jetboat.
218
Robareeno
Aug 13, 20201 min read
3D print instructions for the Jet Thruster Main Body
The image below is of the Main jet body in a translucent red color for clarity along with support material appearing in clear. This was...
278
bottom of page