top of page

3D print instructions for the Jet Thruster Main Body

Updated: Aug 26, 2023

The image below is of the Main jet body in a translucent red color for clarity along with support material appearing in clear.

This was designed to be printed on the build plate in the following orientation:

Note: the print body and the support material are several different files. In order to group them in such a way so that they are oriented to each other see these instructions:

For information on how to set a body to print as support material in Cura see these instructions:

Cura slicer print settings for this part should use the solid body profile

247 views0 comments


Commenting has been turned off.
bottom of page