In your blog on RC groups you state that the fokker will not fly unless printed in lightweight PLA...however you have not updated this site's construction blog to reflect that..I love your design, it's my favorite aircraft, but that info is pretty important and I found it by accident..I had to re print the fuselage in lightweight PLA and Im still trying to get the cg right
Jeff thanks for the input and the contribution here. One of the reasons I chose to do the construction documents as a blog is so they could be readily updated and everyone will always have the latest info. I will clarify that statement in the blog.
In your blog on RC groups you state that the fokker will not fly unless printed in lightweight PLA...however you have not updated this site's construction blog to reflect that..I love your design, it's my favorite aircraft, but that info is pretty important and I found it by accident..I had to re print the fuselage in lightweight PLA and Im still trying to get the cg right